Christopher Juckins

SysAdmin Tips, Tricks and other Software Tools

User Tools

Site Tools


recover_data_from_failed_netgear_stora_ms2110_nas

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
recover_data_from_failed_netgear_stora_ms2110_nas [2018/07/14 17:00]
juckins
recover_data_from_failed_netgear_stora_ms2110_nas [2018/07/14 17:02] (current)
juckins
Line 9: Line 9:
 This STORA appears to use a software RAID configuration and the data is formatted using the Linux XFS file system. This STORA appears to use a software RAID configuration and the data is formatted using the Linux XFS file system.
  
-The basic idea is to have a desktop PC running linux, such as 64-bit Red Hat Enterprise Linux 6 (RHEL6) or [[https://​www.centos.org/​|CentOS6]] which supports the XFS file system. ​ Power it off, and attach the STORA hard disk as a secondary drive (it uses a SATA connection). ​ Linux should recognize the hard drive and using the steps below will mount the drive. ​ Then the data can be copied off the drive, or rsync'​d to a remote machine.  ​+The basic idea is to have a desktop PC running linux, such as 64-bit Red Hat Enterprise Linux 6 (RHEL6) or [[https://​www.centos.org/​|CentOS6]] which supports the XFS file system. ​ Power it off, and attach the STORA hard disk as a secondary drive (it uses a SATA connection). ​ Linux should recognize the hard drive (probably as /​dev/​sdb1) ​and using the steps below you can mount the drive. ​ Then the data can be copied off the drive, or rsync'​d to a remote machine.  ​
  
 <​code>​ <​code>​
Line 29: Line 29:
 <​code>​ <​code>​
 # mdadm --assemble /dev/md127 --run /dev/sdb1 # mdadm --assemble /dev/md127 --run /dev/sdb1
 +mdadm: /dev/md127 has been started with 1 drive (out of 2).
 </​code>​ </​code>​
 This starts the RAID with 1 drive This starts the RAID with 1 drive
recover_data_from_failed_netgear_stora_ms2110_nas.txt ยท Last modified: 2018/07/14 17:02 by juckins