Christopher Juckins

SysAdmin Tips, Tricks and other Software Tools

User Tools

Site Tools

Trace:
recover_data_from_failed_netgear_stora_ms2110_nas

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
Last revisionBoth sides next revision
recover_data_from_failed_netgear_stora_ms2110_nas [2018/07/13 21:33] – juckinsrecover_data_from_failed_netgear_stora_ms2110_nas [2018/07/14 17:00] – juckins
Line 13: Line 13:
 <code> <code>
 # cat /proc/mdstat # cat /proc/mdstat
 +Personalities : [raid1] 
 +md127 : active (auto-read-only) raid1 sdb1[0]
 +      976562432 blocks [2/1] [U_]
 +      
 +unused devices: <none>
 </code> </code>
-The result shows what the active RAID1 device is, for example **md127**.+The result shows what the active RAID1 device is, as seen above it is **md127**.
  
 <code> <code>
 # mdadm --stop /dev/md127 # mdadm --stop /dev/md127
 +mdadm: stopped /dev/md127
 </code> </code>
-This stops the RAID device so you can act upon it.  You should see something like **stopped**.+This stops the RAID device so you can act upon it.  Look for confirmation that it is **stopped**.
  
 <code> <code>
recover_data_from_failed_netgear_stora_ms2110_nas.txt · Last modified: 2018/07/14 17:02 by juckins