Differences

This shows you the differences between two versions of the page.

--- disable_screen_blanking [2012/02/06 13:32] – juckins
+++ disable_screen_blanking [2025/03/20 18:23] (current) – juckins
@@ Line 1: / Line 1: @@
-====== Disabling Screen Blanking ======
+==== Disable Screen Blanking in Linux ====
 By default, Red Hat Linux blanks the screen after an interval of no keyboard or mouse activity (usually 10 minutes).  This can be sometimes inconvenient.
@@ Line 18: / Line 19: @@
 Other notes:
+Redhat 6.4:
+From Brad:
+The workaround is achieved by issuing the following, as user root:
+gconftool-2 --direct --config-source=xml:readwrite:/etc/gconf/gconf.xml.mandatory --type bool --set /apps/gnome-screensaver/idle_activation_enabled false
+<code>
+Have gotten a few reports and concerns about issues waking up from the
+screensaver. The details as we know it:
+-Blank Screensaver is set to come on after 15 minutes of the workstation
+being "idle".
+-If users attempt to wake the screensaver up after less than 15-20 minutes
+of the screensaver being on, then the screensaver will wake up in a few seconds.
+-If users attempt to wake the screensaver up after it being on more than
+-20 minutes, then the screensaver will take 30-90+ seconds to wake up.
+-So total idle time is around 30-35 minutes before the issue will occur.
+Seems to only occur on the workstations. Doesn't matter if the user wakes
+up using mouse or keyboard.
+We are actively working a ticket with RedHat on the issue. If anyone has
+details differing from our above understanding, let me know, it
+may prove useful in determining the ultimate cause.
+If this is a concern the workaround is to disable the screensaver.
+You can run the following command on each workstation to disable
+the screensaver.
+gconftool-2 --direct --config-source=xml:readwrite:/etc/gconf/gconf.xml.mandatory --type bool --set /apps/gnome-screensaver/idle_activation_enabled false
+</code>
 <code>
 N-AWIPS Workstations
@@ Line 69: / Line 108: @@
 [[http://www.x.org/archive/X11R6.8.0/doc/xorg.conf.5.html]]
-Option "BlankTime" "time"
-    sets the inactivity timeout for the blanking phase of the screensaver. time is in minutes. This is equivalent to the Xorg server's `-s' flag, and the value can be changed at run-time with xset(1x) . Default: 10 minutes.
-Option "StandbyTime" "time"
+__Option "BlankTime" "time"__
-    sets the inactivity timeout for the "standby" phase of DPMS mode. time is in minutes, and the value can be changed at run-time with xset(1x) . Default: 20 minutes. This is only suitable for VESA DPMS compatible monitors, and may not be supported by all video drivers. It is only enabled for screens that have the "DPMS" option set (see the MONITOR section below).
+sets the inactivity timeout for the blanking phase of the screensaver. time is in minutes. This is equivalent to the Xorg server's `-s' flag, and the value can be changed at run-time with xset(1x) . Default: 10 minutes.
+__Option "StandbyTime" "time"__
+sets the inactivity timeout for the "standby" phase of DPMS mode. time is in minutes, and the value can be changed at run-time with xset(1x) . Default: 20 minutes. This is only suitable for VESA DPMS compatible monitors, and may not be supported by all video drivers. It is only enabled for screens that have the "DPMS" option set (see the MONITOR section below).
-Option "SuspendTime" "time"
+__Option "SuspendTime" "time"__
-    sets the inactivity timeout for the "suspend" phase of DPMS mode. time is in minutes, and the value can be changed at run-time with xset(1x) . Default: 30 minutes. This is only suitable for VESA DPMS compatible monitors, and may not be supported by all video drivers. It is only enabled for screens that have the "DPMS" option set (see the MONITOR section below).
+sets the inactivity timeout for the "suspend" phase of DPMS mode. time is in minutes, and the value can be changed at run-time with xset(1x) . Default: 30 minutes. This is only suitable for VESA DPMS compatible monitors, and may not be supported by all video drivers. It is only enabled for screens that have the "DPMS" option set (see the MONITOR section below).
-Option "OffTime" "time"
+__Option "OffTime" "time"__
-    sets the inactivity timeout for the "off" phase of DPMS mode. time is in minutes, and the value can be changed at run-time with xset(1x) . Default: 40 minutes. This is only suitable for VESA DPMS compatible monitors, and may not be supported by all video drivers. It is only enabled for screens that have the "DPMS" option set (see the MONITOR section below).
+sets the inactivity timeout for the "off" phase of DPMS mode. time is in minutes, and the value can be changed at run-time with xset(1x) . Default: 40 minutes. This is only suitable for VESA DPMS compatible monitors, and may not be supported by all video drivers. It is only enabled for screens that have the "DPMS" option set (see the MONITOR section below).